24 research outputs found

    Bulk and interfacial stresses in suspensions of soft and hard colloids

    Full text link
    We explore the influence of particle softness and internal structure on both the bulk and interfacial rheological properties of colloidal suspensions. We probe bulk stresses by conventional rheology, by measuring the flow curves, shear stress vs strain rate, for suspensions of soft, deformable microgel particles and suspensions of near hard-sphere-like silica particles. A similar behavior is seen for both kind of particles in suspensions at concentrations up to the random close packing volume fraction, in agreement with recent theoretical predictions for sub-micron colloids. Transient interfacial stresses are measured by analyzing the patterns formed by the interface between the suspensions and their own solvent, due to a generalized Saffman-Taylor hydrodynamic instability. At odd with the bulk behavior, we find that microgels and hard particle suspensions exhibit vastly different interfacial stress properties. We propose that this surprising behavior results mainly from the difference in particle internal structure (polymeric network for microgels vs compact solid for the silica particles), rather than softness alone.Comment: 20 pages, 8 figure

    Tuning Structure and Rheology of Silica-Latex Nanocomposites with the Molecular Weight of Matrix Chains: A Coupled SAXS-TEM-Simulation Approach

    Full text link
    The structure of silica-latex nanocomposites of three matrix chain masses (20, 50, and 160 kg/mol of poly(ethyl methacrylate)) are studied using a SAXS/TEM approach, coupled via Monte Carlo simulations of scattering of fully polydisperse silica nanoparticle aggregates. At low silica concentrations (1 vol. %), the impact of the matrix chain mass on the structure is quantified in terms of the aggregation number distribution function, highest mass leading to individual dispersion, whereas the lower masses favor the formation of small aggregates. Both simulations for SAXS and TEM give compatible aggregate compacities around 10 vol. %, indicating that the construction algorithm for aggregates is realistic. Our results on structure are rationalized in terms of the critical collision time between nanoparticles due to diffusion in viscous matrices. At higher concentrations, aggregates overlap and form a percolated network, with a smaller and lighter mesh in the presence of high mass polymers. The linear rheology is investigated with oscillatory shear experiments. It shows a feature related to the silica structure at low frequencies, the amplitude of which can be described by two power laws separated by the percolation threshold of aggregates

    Non-equilibrium interfacial tension in simple and complex fluids

    No full text
    International audienceIn our work we report the measurement of non-equilibrium interfacial tension of polymer and hard sphere suspensions in contact with their own solvent. By visualizing fingering instability (VF) in radial Hele-Shaw geometry, appearing when the solvent displaces suspensions of colloids or polymers, we measure interfacial tensions in function of the volume fraction of the suspended objects, showing that the internal degrees of freedom of the particles drive the low volume fraction behavior (Figure 1). Our results support the existence of a positive tension between miscible fluids, confirm the quadratic scaling predicted by Korteweg [4] for long linear and crosslinked polymers and show a positive rapidly growing tension for hard sphere suspensions up to maximum packing, whose description necessitates a theoretical framework going beyond the classic square gradient model. We rationalize our findings assuming the suspension/solvent interface in local thermodynamic equilibrium, computing explicitly the square gradient contribution to the interfacial tension for polymer/solvent and simple molecular liquid mixtures and proposing a phenomenological model capturing the compositional dependence of the interfacial tension for large concentration gradients. Finally we include and analyze data reported in literature and obtained via spinning drop tensiometry that validate the model and we propose the analysis of fluid dynamic instability as a new tool to probe interfacial stresses

    Nonequilibrium Interfacial Tension in Simple and Complex Fluids

    No full text
    International audienceInterfacial tension between immiscible phases is a well-known phenomenon, which manifests itself in everyday life, from the shape of droplets and foam bubbles to the capillary rise of sap in plants or the locomotion of insects on a water surface. More than a century ago, Korteweg generalized this notion by arguing that stresses at the interface between two miscible fluids act transiently as an effective, nonequilibrium interfacial tension, before homogenization is eventually reached. In spite of its relevance in fields as diverse as geosciences, polymer physics, multiphase flows, and fluid removal, experiments and theoretical works on the interfacial tension of miscible systems are still scarce, and mostly restricted to molecular fluids. This leaves crucial questions unanswered, concerning the very existence of the effective interfacial tension, its stabilizing or destabilizing character, and its dependence on the fluid's composition and concentration gradients. We present an extensive set of measurements on miscible complex fluids that demonstrate the existence and the stabilizing character of the effective interfacial tension, unveil new regimes beyond Korteweg's predictions, and quantify its dependence on the nature of the fluids and the composition gradient at the interface. We introduce a simple yet general model that rationalizes nonequilibrium interfacial stresses to arbitrary mixtures, beyond Korteweg's small gradient regime, and show that the model captures remarkably well both our new measurements and literature data on molecular and polymer fluids. Finally, we briefly discuss the relevance of our model to a variety of interface-driven problems, from phase separation to fracture, which are not adequately captured by current approaches based on the assumption of small gradients

    Contrast-matching gone wrong? A study of polymer conformation in nanocomposites

    No full text
    International audienceThe structure of polymer nanocomposites has important consequences on final properties, like for instance mechanical reinforcement. While the structure of the hard filler phase is usually characterized by electron microscopy and small-angle X-ray scattering, the chain conformation can only be measured by small-angle neutron scattering (SANS). Continuous efforts over the past 15 years have produced a body of sometimes contradictory, because system-dependent, results. In virtually all studies, however, a mismatch ruining the polymer form factor at low-angles has been observed, in spite of careful contrast-matching. In this study, the conformation of polymer chains in silica-latex-nanocomposites has been studied under zero-average contrast conditions using SANS

    Chain Signal in Nanolatex Based Nanocomposites

    No full text
    The mechanical properties of nanocomposite materials are controlled to a large extent by the filler-filler interactions. Nevertheless, another important contribution - less well understood - is due to the polymer chain-filler interactions. Experimentally, the radius of gyration (Rg) of polymer chains in nanocomposites can be measured by SANS using the zero average contrast conditions (mixing hydrogenated (H) and deuterated (D) chains) in order to match the filler signal and measure the chain form factor. However, many studies display an unexplained polluted SANS signal in the low-q range. In this talk, we will discuss the measurement of polymer chain signal in nanocomposites prepared from the drying of a colloidal dispersion of silica and polymer particles. In such samples, the mixture of H and D chains results from the dissolution of H and D latex beads. This dissolution was followed by SANS in the low q range, as function of thermal annealing (figure 1) and filler content using an original model [1]. Experimental results demonstrate that the dissolution dynamics of polymer chains is significantly slowed down by the presence of silica nanoparticles [1]. Besides, the effect of the filler size on the chain signal in the nanocomposites was studied by a combination of SAXS and SANS measurements and reveal that the filler contribute to the SANS signal in nanocomposites filled with small silica nanoparticles (compared to the latex beads) contrarily to nanocomposites filled with bigger silica particles. We rationalize this observation considering an attractive interaction between polymers and silica particles leading to an inhibited interdiffusion of latex particles in the vicinity of silica particles, and a statistical local assymmetry due to the small number of latex beads defining the environment of small silica particles. Finally, no evolution of the polymer Rg was found in our samples.References[1] Genix et al., Macromolecules (2012), 45, 1663.[2] Banc et al., Macromolecules (2015), in press

    Origin of Small-Angle Scattering from Contrast-Matched Nanoparticles: A Study of Chain and Filler Structure in Polymer Nanocomposites

    No full text
    The conformation of poly(ethyl methacrylate) chains in silica–latex nanocomposites has been studied under zero average contrast conditions (ZAC) using small-angle neutron scattering (SANS). Samples have been prepared by drying colloidal suspensions of silica and polymer nanoparticles (NPs) followed by thermal annealing, for two different silica NPs (radius of 5 and 15 nm) and two chain molecular weights (17 and 100 kg/mol). By appropriate mixing of hydrogenated and deuterated polymer, chain scattering contrast is introduced, and in principle silica scattering suppressed. The silica structure consisting mostly of small fractal aggregates is characterized by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) on the same samples. The measurement of the chain structure by SANS, however, is perturbed by unwanted silica contributions, as often reported in the literature. Here, the contribution of contrast-matched silica is evidenced as a function of system parameters, namely chain mass, silica size, and volume fraction, and a model rationalizing these contributions for the first time is proposed. On the basis of a statistical analysis, a nanometer-thick polymer shell surrounding silica NPs is shown to create contrast, which is presumably maintained by the reduced mobility of polymer close to interfaces or attractive polymer–silica interactions. This shell is proven to be quantitatively important only for the smallest silica NPs. Finally, the pure polymer scattering can be isolated, and the polymer radius of gyration is found to be independent of filler content and NP size
    corecore